English
Chinese English

UL Teflon series

Home-Products-Teflon Wire-UL Teflon series
UL Teflon series
FEP PTFE wire UL1592 1592 wire and cable

1. Product features and uses:

(1) Rated voltage: 300V

(2) Working temperature: -65~+200 ℃

(3) Conductor: Stranded tinned copper wire

(4) Insulation: FEP Teflon

(5) Color: Red/Yellow/Blue/White/Black/Yellow Green/Brown/Orange/Purple/Green/etc

(6) Product Features:

It has excellent corrosion resistance, almost insoluble in any organic solvent, and can resist oil, strong acid, and strong alkali,

Strong oxidants, etc; Has excellent electrical insulation performance, high voltage resistance, low high-frequency loss, no moisture absorption, and insulation resistance

Big; Has excellent flame resistance, aging resistance, and long service life.

(7) Product Usage:

In the electronics industry, it can be used for temperature compensation wires, low-temperature resistant wires, high-temperature heating wires, aging resistant wires, and resistors

Fuel line; In the household appliance industry, it can be used for air conditioners, microwave ovens, electronic disinfection cabinets, rice cookers, and electronic heaters

Internal wiring for water bottles, electric heaters, electric ovens, electric frying pans, lighting fixtures, etc.  

2. Specification structure and technical parameters:


\

标准产品与劣质产品的区别：
The difference between national standard products and non compliant products. Product names mainly refer to the materials used by our company. Some small manufacturers have taken measures to cut corners and use substandard materials. The consequences of using substandard products are cost reduction. The proportion of products from small manufacturers that are lower than the price of genuine products is that the length of genuine materials is 100 meters/circle, and the intentionally short weight is 90-95 meters/circle, which affects the reputation and reduces it by 5% -10%. The quality is reduced by 20% -40% compared to genuine products. Teflon wire, tin plated copper conductor, 100% pure copper+tin plated copper. Impurity copper, copper-clad aluminum or partially copper-clad aluminum are used. The diameter and number of copper wires do not meet the standard, and the square number is not enough. The direct current resistance of the conductor does not meet the standard. During use, excessive heat will be generated, which will affect the service life 20%~50% PTFE FEP Genuine FEP Poor quality FEP Poor quality FEP Poor insulation effect can cause skin breakage, bare copper, cracking, etc., which can easily lead to equipment leakage and reduce safety performance by 20% to 30% if it does not meet the standards
4.产品图片
\




\


\



\

\


\


\


\


\



\
粤振电线：400-8390-998
\


广东粤振电线电缆有限公司!400-8390-998
\